• Install the high-strength crossbars on the vehicle. (Professional installation recommended, consult with a specialist before installation)
• Securely attach the rails and crossbars installed underneath using rail bolts.

DARK BARRACKS recommends the use of sturdy Thule or high-strength crossbars for most vehicles. However, individual custom-made crossbars such as roof racks, pickup truck beds, cargo boxes, and bunker roll bars require consultation.
If you utilize one of above, please feel free to contact us to info@darkbarracks.com.

• Unlock the front lock using the designated key.
• Hold the front handle and lift it upwards. (Ensure it is fully extended)
• Hang the ladder and check the upper wall of the left/right side that is covered.
• Pull the left/right side walls using the provided ropes.
• Attach the ropes to the elastic cords located in the lower center of the rear side for the first attachment and secure them for the second attachment.
  (Repeat the same process for the opposite side.)
• Use the ladder to climb onto the product and secure all 3 (6 in total) locks on the inner left/right walls (top) to ensure safe installation.
• You can utilize the device which prevents the door from the closing located on the bottom of the product to secure the door.
• All internal access doors have door locking mechanisms, providing a safe and comfortable environment while sleeping.

• Release all 3 (6 in total) locks on the inner left/right walls (upper wall).
• Descend to the ground and release the ropes on the lower left/right walls, then gently lay the wall down.
• Lift the safety device located inside the front frame. (Safety device that prevents the product from closing completely)
• Hold the front rope (1) on the left side, bend the front wall, and slowly pull the product using the front rope (2). Be cautious not to get fingers caught when closing the product.
• After releasing the safety device on the front part of the tent, please close the product.
• Secure the tent lock

Wipe the product lightly with a towel or sponge as it doesn't absorb any moisture.
Remove the 3-layer mattress and take it out of the tent to wash the mattress for a clean and comfortable indoor space.